Security Alarm Systems

• Micro controller based 4/8 zone system
• Independent scheduling of each zone
• User programmable delay setting for each zone
• User programmable chime indication
• Panic switch for emergency alarm activation
• Build in internal hotter
• External hotter provision for high decibel alarm
• Hotter disconnect sensing
• Hooter enable/disable & duration setting
• Telephone based System arming/disarming & Switching1Light arm/disarm
• Build in auto dialer With 20 sec voice module
• Announces alarm message to 5 telephone numbers
• Stops dialing only on receiving confirmation
• Telephone line monitoring and disconnection alert
• Keypad / zone tamper detection and alert
• Optional RF remote provision
• 24 hour fire / panic zone

• Micro controller based

• Key operated arm/disarm

• 3 zone Integrated Key Based system.

• 3 protection zones-entry/exit/emergency (panic)

• Zone 1 - with delay, zone 2 - without delay, zone 3 panic

• Led indications: power on, low battery, confirmation, with delay, without delay (siren)

• Provision for 12vDc, 3Ah rechargeable battery

• Tamper protection

• All type of sensors can be attached

• External hotter disconnection sensing and alarm

• Build in internal hooter.

• External hooter provision for high decibel alarm.

• Hooter disconnect sensing.

• Provision to add Auto Telephone Dialer.

• User programmable delay setting for each zone
• Sensors activated lights to deter intruders
• Time based operation of 4 Lights/ Appliances (To create a lived in look when you are away)
• Time based automatic arm/disarm
• User programmable chime indication
• External hotter provision for high decibel alarm
• Hotter disconnect sensing
• Hooter enable/disable & duration setting
• Telephone based system arming/disarming & switching1light arm/disarm
• Build in auto dialer with 20 sec voice module
• Announces alarm message to 5 telephone numbers
• Stops dialing only on receiving confirmation
• Telephone line monitoring and disconnection alert
• Battery back up with build in charger
• Low Battery alert
• Keypad / zone tamper detection and alert
• Optional RF remote provision
• 24 hour fire / panic zone
• Events log for up to 48 events with date and time

¨ Support to CONTACT ID protocol.

¨ Access Codes, 1installer code, 1 master code. 8 common user codes and duress code.

¨ Dial 5 telephone numbers (mobile and Land Line number). Alarm telephone is priority.

¨ Compatible with DTMF and pulse dialing.

¨ Phone line be cut or short-circuit will send an alarm. (Indicator or siren for optional)

¨ Remote Arm/Disarm, monitor, and on-site alarm Setup.

¨ Automatically learning code between Wireless PIR detector, remote controller and main console (8 wireless can up to 24 zones and 8 remote controllers)

¨ Wired zone responds speed (5ms-1000ms) and support (Normal Open, Normal Close and end of line resistance) at freedom.

¨ Zone attribute can be program for Fire alarm, Medical alarm, and Emergency alarm at freedom. Each zone can be programmed with different remote controllers.

¨ Two timers can be set to Arm/Disarm independently.

¨ Voice pre-recorded.

¨ Alarm delay (00-99 seconds) and Arm delay (00-99 seconds) can be set for corresponding zones.

¨ Main unit disassembly, slave detector disassembly, AC power cut, backup battery lower and slave detector power lower will send alarm.

¨ Work with wired/wireless Siren and linkage device.

¨ Lastest 20 pieces alarm can be recorded and can't be deleted. Last Arm Disarm time can be remembered.

¨ Main unit and slave detector make communication times in 24 hour to check if there is communication malfunction. If there is a malfunction, the main console will alert corresponding zone within 26 hours.

¨ Slave detector sends report to main unit once it is turn on. Main unit will indicate.

¨ BothAC220V and 12V1.2AH storage battery power supply, and change automatically.

¨ Telephone lightning proof.